Comparing oak wood flooring unfinished and prefinished starts with one practical question: where will the finishing take place? This guide explains how finishing workflows, color approval, and project scheduling affect your choice.
This article explains both approaches. VIF’s OEM engineered oak series has confirmed UV Oiled and UV Lacquered finish options. Unfinished supply is not currently confirmed and is not offered here as an available configuration.

1. Understand Where the Finishing Happens
The National Wood Flooring Association distinguishes factory finishing from site finishing by where the finish is applied: at the factory or at the installation location. Its wood flooring finishes guide provides an overview of these approaches.
For an unfinished flooring proposal, the purchasing brief needs to cover both the board and the proposed finishing system. Confirm the preparation, any coloring steps, coating application, and responsibilities with the relevant flooring professional.
For prefinished oak flooring, review the proposed finished product before ordering. The selected color, coating, sheen, grade, and construction should identify what the buyer is approving.
“Unfinished” and “prefinished” describe finishing status. They do not, by themselves, establish the wood species, construction, installation method, or suitability for a particular project.
2. Compare the Complete Workflow
For wholesalers and importers, the choice affects what customers receive and what additional work must be arranged. For project teams, it affects the sequence of sample approval and site activities.
| Decision Point | Unfinished Oak Flooring Proposal | Prefinished Oak Flooring Proposal |
|---|---|---|
| Product approval | Board specification plus a separately defined finishing process | Finished board specification and approved appearance sample |
| Color development | Agree on the proposed site-applied color and coating combination | Agree on the proposed factory-finished sample |
| Responsibilities | Identify who prepares, colors, coats, and approves the floor | Identify who approves the product and coordinates installation |
| Schedule | Include the selected finishing system’s application and use restrictions | Confirm supply, installation, and product-specific handover requirements |
| Documentation | Board details, finishing system, sample reference, and application instructions | Board details, finish designation, sample reference, and relevant guidance |
| Available Options | Unfinished supply is not confirmed | UV Oiled or UV Lacquered, selected for the order |
The table is a planning comparison, not an installation instruction. Neither column establishes a shorter total project duration without the actual product, finishing system, and site plan.
3. Approve Color on the Intended Finished Surface
An unfinished wood sample does not confirm how a proposed finished floor will look. Ask for a sample that represents the intended combination of wood, color, coating, and sheen before approving that appearance.
For site finishing, agree on who prepares the proposed finished sample and how it relates to the planned application. Record any differences between the reference and the final proposal.

For factory-finished flooring, request the selected production configuration in the sample brief. A color approved with UV oil should not automatically become approval of the same named color with UV lacquer.
The selected color directions are Pearl Beige, Warm Wheat, Linen Beige, Stone Greige, Mist Grey, and Natural Sand. These names describe appearance, not an unfinished state or a particular coloring treatment.
Natural Sand, for example, is a sandy beige color with a slightly warm wood tone. Its name does not mean bare oak. Likewise, Mist Grey does not establish bleaching, and Warm Wheat does not establish smoking or staining.

Review photographs to build a shortlist, then use physical samples and written references for approval. Discuss natural variation rather than expecting every board to reproduce one small sample exactly.
4. Separate Finishing Time from Installation and Arrival
A site-finishing proposal needs a schedule based on the actual coating system. Ask the responsible contractor to identify application stages, drying and curing requirements, access restrictions, and handover conditions.
Follow the product-specific instructions for the selected coating system. Confirm compatibility, drying conditions, and any waiting periods against that system’s guidance.
Do not assign one universal waiting period to all oils or lacquers. Prefinished flooring should not be described as ready for immediate unrestricted use; installation and handover requirements need separate confirmation.
Sample development takes approximately two weeks, with sample specifications and charges confirmed separately. Production lead time starts from 45 days after receipt of deposit, subject to order confirmation. This refers to production, not shipment or arrival timing.
5. Keep Grade and Construction Independent of Finish
The engineered oak flooring boards measure 1900 × 190 mm. Thickness options are 14 mm total with a 3 mm oak face, or 15 mm total with a 4 mm oak face.
Supporting construction options include three-layer poplar, multilayer poplar, multilayer eucalyptus, or multilayer all-birch. Tongue-and-groove or locking joints are confirmed by order. These are alternative configurations, not features combined into one default product. Joint selection alone does not establish installation suitability.
Current grades are ABC and CD. Premium describes the ABC selection and does not imply equivalence to another supplier’s Select grade. Character describes natural wood features and does not universally mean CD. It may cover other letter grades under different grading systems, but this does not mean those grades are currently available.

Approve grade through written criteria and corresponding samples. Finish selection does not define acceptable knot sizes, repair limits, or a knot-free appearance.
The oak raw material comes from the Changbai Mountains in Northeast China. This sourcing information does not establish the finished board’s manufacturing origin. The moisture content control target is 7–9%.
6. Choose According to Responsibilities You Can Confirm
An unfinished proposal may be considered when the project intends to manage a separately specified finishing process and has confirmed a suitable product source. Unfinished supply has not been confirmed for this product range.
A prefinished proposal can be reviewed when the team wants to approve the finished appearance before ordering. OEM color customization is supported, but it should not be confused with unfinished supply.
For this series in the U.S. market, UV lacquer is the main finish direction. This is a series-specific statement, not an industry statistic. UV Oiled remains an alternative configuration, and actual sheen must be confirmed rather than assumed matte.
Before choosing, identify the approved appearance, selected construction, responsible teams, and complete schedule. Request maintenance information for the actual finish. VIF supports weekly order updates, inspection reports, and factory audit arrangements through its supply coordination.
Frequently Asked Questions
Does unfinished mean solid oak flooring?
No. Finishing status and construction are separate descriptions. Confirm the construction of the proposed product. The flooring discussed here is engineered oak flooring.
Can VIF currently supply this flooring unfinished?
Unfinished supply has not been confirmed. The confirmed finish options are UV Oiled and UV Lacquered, selected by order.
Does a natural color mean the board has no coating?
No. Natural Sand and other color names describe appearance. Confirm the coating separately.
Are factory-finished floors always matte?
Do not assume a matte finish. Review and approve the actual sheen on the proposed finished sample.
Which option is faster for a project?
Compare the complete confirmed schedules, including supply, any separately arranged finishing, installation and handover. No universal completion-time promise applies.
What should buyers confirm when considering unfinished oak flooring?
Confirm unfinished availability, the proposed finishing system, the color approval process and responsibility for finishing. The confirmed options for this product range are UV Oiled and UV Lacquered; unfinished supply has not been confirmed.
Discuss Your Finish Requirements with VIF
Review the products with confirmed finish options, then send your company name, target market or project location, preferred color and grade, quantity and purchasing schedule.
State whether you are evaluating UV Oiled or UV Lacquered flooring and which appearance questions require sample review.





